16-Channel Video Passive Transceiver Hub

NV-1613
Overview

[NV-1613]

NV-1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of NV-1613 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Tech Specs
  • High-Density 19″ 1U high enclosure features 16 ports
  • Use with any NVT Phybridge passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
  • Use with any NVT Phybridge DigitalEQ™ or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
  • Use with any NVT Phybridge StubEQ™ for distances up to 1,500ft (460m)
  • RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors (included)
  • No power required
  • Exceptional interference rejection
  • Frequency Response DC to 10 MHz
  • Built-in transient protection
  • Supports ’up-the coax’ type control signal up to 750ft (225m)
  • Compatible with qualified UTP cameras
  • Includes sixteen 2ft (60cm) coax jumper cables and rackmount hardware
  • Limited lifetime warranty
Accessories
NV-BNC-8

Coax Jumper Cables (8)

Coax Jumper Cables 2ft pack of 8 each.
NV-WMBK

Hub Wall Mounting Kit (Accessory)

Provides convenient wall mounting option for NVT hub products.
NV-RJ45A

RJ45 to Screw Terminal Adaptor

View Datasheet

The NV-RJ45A RJ45 to Screw Terminal adaptor is wired in accordance with the EIA/TIA 568B wiring standard for structured cabling. This is the same standard that NVT uses in all our products. Please refer to the wiring/pinout diagrams for details as to how UTP conductors are landed on the screw terminal side and marked according to each input channel.
Documentation
Videos
Drawing

IP Migration Made Simple

Learn how NMSU saved over $1 million and fast tracked Migration by 3 years.

 

 

Register Your Opportunity

Secure product availability by registering your opportunity!

Transform your Coax

Eliminate barriers to IP camera migration! Learn how.