NV-653T Video Transmitter is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or better Unshielded Twisted-Pair (UTP) telephone wire.
The unparalleled interference rejection and low emissions of the Model NV-653T allows long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying “hum-bars” when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.
Full-motion CCTV video at distances up to 1 mile (1,6km) when used with active NVT receiver or hub
Exceptional interference rejection
Frequency Response DC to 10 MHz
Built-in transient protection and ground lifting
Three-position distance range switch
Blue power LED, green active LED
Up to ten NV-653Ts may be rack mounted using the NV-RM8/10 Rack Panel Kit
The NV-RM8/10 Rack Panel allows for the rack mounting of up to ten single-port transceivers, such as the NV-213A, NV-652R, or NV-653T. Alternately, it can support up to two four-port devices, such as the NV-413A, NV-452R, or NV-704J-PVD.
The NV-RM 8/10 can reside on front or rear rails in the same rack as NVT hubs, multiplexers, DVRs, or encoders.
This heavy gauge panel is designed to withstand the mechanical load of multiple coax cables. Threaded holes and screws (included) provide easy transceiver mounting, and installation into a 19” rack.