NV-813 is an 8 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.
High-Density 19″ 1U high enclosure features 8 ports
Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
Use with any NVT DigitalEQ™ or active receiver hub as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
Use with any NVT StubEQ™ for distances up to 1,500ft (460m)
RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors included
No power required
Exceptional interference rejection
Frequency Response DC to 10 MHz
Built-in transient protection
Supports “up-the coax” type control signal up to 750ft (225m)
Compatible with qualified UTP cameras
Includes eight 2ft (60cm) coax jumper cables and rackmount hardware (See Accessories below)
The NV-RJ45A RJ45 to Screw Terminal adaptor is wired in accordance with the EIA/TIA 568B wiring standard for structured cabling. This is the same standard that NVT uses in all our products. Please refer to the wiring/pinout diagrams for details as to how UTP conductors are landed on the screw terminal side and marked according to each input channel.
Coax Jumper Cables (8)
Coax Jumper Cables 2ft pack of 8 each
Hub Wall Mounting Kit
Provides convenient wall mounting option for NVT Phybridge hub products.