EC 10 COAX Unmanaged Switch

NVT Phybridge EC 10 Port Unmanaged POE Switches

De plug-and-play EC10 (Ethernet over coax)-switch is een 10-poorts nietbeheerde
Ethernet-over-coax-switch. Deze krachtige switch levert Fast
Ethernet en PoE+ over coaxkabel met een bereik van 610 m.
EC10 is erop gericht de migratie naar IP snel, eenvoudig en kosteneffectief
te maken door een bestaande coaxinfrastructuur over te hevelen. Voordelen
zijn onder meer:
• Het rendement op uw investeringen versnellen door uw infrastructuurkosten
te verlagen.
• Plannings- en ontwikkeltijd samenvoegen.
• Infrastructuurbarrières, risico’s, onderbrekingen en kosten elimineren.
• Een krachtig IP-platform scheppen dat eenvoudig te configureren,
implementeren en beheren is.
Anders dan andere Ethernet-over-coax-technologieën biedt
de EC10-switch:
Snelheid, bereik en kracht
EC10 biedt 100 Mbps (symmetrisch, full duplex) en PoE+ over coaxkabel
met een bereik van 610 m. Het apparaat is bedoeld ter ondersteuning van
de meest veeleisende IP-camera’s en biedt volop extra bandbreedte. De
bandbreedtesnelheid neemt niet af over langere afstanden.
Eenvoudige implementatie
EC10 is een niet-beheerde switch die geen configuratie vereist. De
implementatie is snel en eenvoudig en verloopt zonder onderbrekingen.
Opties voor eindpuntimplementatie
Elke downlinkpoort biedt voldoende bandbreedte om meerdere eindpunten
te ondersteunen. Indien gekoppeld aan een EC4-mediaconverter kunt u
maximaal vier IEEE-compatibele apparaten aansluiten op één coaxkabel op
maximaal 610 m afstand.

IP Migratie Made Simple

Leer hoe NMSU opgeslagen dan $ 1 miljoen en snel gevolgd Migration met 3 jaar.

 

 

Registreer uw Opportunity

Secure beschikbaarheid van het product door het registreren van uw kans!

Transformeer uw Coax

Elimineer belemmeringen voor IP-camera migratie! Leren hoe.

 

FAQ

Where can I buy the NVT Phybridge EC solution?

NVT Phybridge solutions are available through our Distribution Partners. Our list of distributors is constantly growing, please contact us directly for a list of distributors.

What are these solutions?

The NVT Phybridge EC is a Layer 2 Ethernet data switch that provides a complete parallel voice network over existing coaxial cabling. The solution allows for a non-disruptive, quick and easy way to deploy IP camera’s and Unified Communications (UC) applications. The NVT Phybridge EC comes in 8 port models. The NVT Phybridge ECLink Adapters are common to both models. It is necessary to have one ECLink Adapter for every active port on the NVT Phybridge EC.

What is the warranty?

5 Years Silver Maintenance, which includes replacement warranty is standard. Gold and Silver Maintenance levels are also available at additional cost at time of purchase.

What is the service and support?

12 month Silver Maintenance, which includes support is standard. Gold and Silver Maintenance levels are also available at additional cost at time of purchase.

What is the competition?

NVT Phybridge is the only company to competitively offer robust solutions that leverage existing infrastructure to provide POE and Ethernet to an endpoint at distance of 2000 feet or greater.

Do these products support all major VoIP manufacturers?

Yes. Any IP PBX device is supported as the NVT Phybridge EC is an unmanaged networking switch.

Who has tested the NVT Phybridge EC?

Multiple manufacturers, VARs and vendors have tested the NVT Phybridge EC. Please contact us directly for a list of partners.

How is QoS handled?

Because of the point to point topology of the ECLink Adapter to the NVT Phybridge EC, customized QoS configuration is not required.

What is the maximum PoE Class IP device/camera that can be supported?

Based on the IEEE 802.3af or 803.2at standard, operational testing is required to determine if the Class 3 IP device you have will work in your unique network topology (the longer the two wire length, the less power is available to the IP device.) First, please verify the manufacturer’s IP device power consumption specification, if it is less than 10.6 W then you may be able to use a standard EClink Adapter, you will need to test your IP device in the final network topology to ensure the line power draw and IP device power draw does not exceed the 10.6 W. A quick test is to plug the IP device into the EClink Adapter and put the IP device into maximum power consumption. For an IP phone this is usually the ringing state (maximize the ring volume), if the phone does not restart or shut down then your IP device and line load is drawing less power than the 10.6 W maximum. The EC limits the current drawn on the RJ45 PoE port. If the power draw of the IP phone (device) and line length exceeds the power that can be provided by the EClink for the IP phone, then it may not power up or will reset during operation. If the problem persists re-test the same IP phone at a shorter cable length to verify that problem is related to the IP camera drawing more than the maximum rated at the desired line length.

What IP cameras are supported?

Any IEEE 802.3af  or 803.2at compliant IP devices are supported.