NOWEDA Uses NVT Phybridge PoLRE Long Reach PoE Technology to Improve its IP Communication Deployment to Avoid over 900 Kilograms of Cabling E-Waste
3-minute read time
Summary
NOWEDA needed to upgrade its communication capabilities throughout 20 German warehousing facilities but faced high network costs, business disruption, and complexity caused by re-cabling requirements.
The customer learned about NVT Phybridge and was thrilled to learn that the PoLRE long-reach PoE switch would simplify and improve the digital transformation project.
NOWEDA used PoLRE PoE switches to deploy over 300 Unify IP DECT devices using existing network cabling, reducing project costs, complexity, business disruption, and deployment times.
Challenge
NOWEDA, a leading German pharmaceutical wholesaler, needed to upgrade its communication capabilities and deploy over 300 IP DECT devices throughout 20 warehousing facilities. The existing analog communication system was outdated and unreliable, which caused significant operational disruption and high maintenance costs. The organization needed to complete the IP upgrade but was concerned with the potential business disruption caused by re-cabling requirements. NOWEDA needed to find an innovative solution to help overcome infrastructure barriers and complete the digital transformation.
Solution
After thoroughly researching all networking solutions that could enable IP DECT devices using the existing single-pair UTP cabling, the customer discovered the NVT Phybridge PoLRE long-reach PoE switch. The reseller, InterData Systems, helped the customer proceed with a free, no-obligation proof-of-concept to test the equipment on-site.
After a few simple setup steps, the PoLRE switch transformed NOWEDA’s existing J-Y(ST)Y wiring infrastructure into a secure and robust PoE backbone for the new IP DECT devices. The PoLRE switch delivers Ethernet and PoE over single-pair UTP cabling with up to reach – four times the reach of standard Ethernet switches. The customer was impressed with the PoLRE switch and decided to proceed with the digital transformation project across all 20 locations.
Result
NOWEDA used the PoLRE switch to deploy over 300 IP DECT devices across its extensive warehousing facilities. InterData Systems transformed the customer’s existing network cabling into a robust and secure PoE backbone for the new system, reducing network readiness costs, business disruption, and cabling e-waste.
InterData Systems used the PoLRE switch to complete the project with minimal network downtime while eliminating the need to install new cabling, . NOWEDA now has access to advanced communication capabilities across several sites that improves its overall efficiency and productivity. Also, the company furthered its commitment to environmental sustainability by preventing over 900 kilograms of cabling e-waste.
The NOWEDA IT team was extremely satisfied with the outcome of the project. “The NVT Phybridge PoLRE PoE switch was simple to implement, stable, and error-free since we integrated them into our overall network,” said Axel Hentschel, Head of IT Infrastructure and Operations, NOWEDA. “The PoLRE switch saved us a lot of time, money, and effort for our teams.”
Sustainability
NOWEDA is committed to reducing its ecological footprint through a wide range of environmental protection measures and initiatives. Its facilities use energy from 100% renewable sources, and the organization has planted thousands of trees to support climate protection and conservation. In line with its ongoing environmental sustainability initiatives, NOWEDA used NVT Phybridge network technologies to prevent over 900 kilograms of cabling e-waste by leveraging its existing infrastructure.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2023/04/WEB_NOWEDA.jpg?fit=1667%2C928&ssl=19281667Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2023-04-26 11:24:072023-04-26 11:26:42NOWEDA Eliminates Network Barriers and Accelerates Deployment of Over 300 IP DECT Devices Using Disruptive PoE Innovations
Oakville, ON (April 18, 2023) – NVT Phybridge, a global leader in long-reach Power over Ethernet technology, has partnered with AVPro, a technology distributor, to support partners and customers in Portugal and Southern Europe. As a value-added distributor, AVPro provides additional services to ensure digital transformation success, including project design and specialized technical training. The partnership improves NVT Phybridge’s ability to distribute products and service customers in Southern Europe.
“As AVPro continues to deploy advanced video analytics solutions for smart cities across Portugal, we realized we needed a reliable long-range PoE portfolio to remove network readiness barriers for customers,” said Carlos Ramos, CCTV & Smart Cities Solutions Coordinator, AVPro. “NVT Phybridge provides our teams with high-quality and flexible PoE solutions to address a wide range of customer needs, providing immense value to our teams.”
“As a strategic Bosch distributor in the region, AVPro is a perfect partner for us,” said Lucas Spagnuolo, Regional Sales Manager for Southern Europe. “NVT Phybridge is a Bosch-certified interoperability partner. Our partnership with AVPro will strengthen our regional partnerships as we continue to provide simple and secure connectivity from endpoint to application, resulting in better digital transformation outcomes for AVPro customers.”
About AV Pro
AVPro emerged in 2016 as a security and audio-visual equipment distributor with a differentiated approach, focusing on the solution and not simply the sale. With a highly specialized team, AVPro focuses on the customer and their project, facilitating an open and transparent buying experience. AVPro provides partners with professional service and knowledge of the solution, which translates into greater satisfaction for the end customer.
Headquartered in Albergaria-a-Velha, Aveiro, AVPro is proud to collaborate on international projects, providing in-depth technical knowledge and expertise through experience and professionalism.
About NVT Phybridge
NVT Phybridge is a global leader in long-reach Power over Ethernet solutions. We help organizations simplify and accelerate digital transformation projects without costly infrastructure requirements. NVT Phybridge Power over Ethernet switches and extenders provide PoE over any new or existing network infrastructure with up to 80% cost savings. Unlike other networking solutions that require the implementation of the latest network cabling, our products enable IP and IoT solutions up to 70% faster to deliver incredible ROI without the complexity or disruption of a major network overhaul.
NVT Phybridge is a North American-based technology company with global reach dedicated to practical innovation. We deliver innovative and affordable networking solutions that are technologically advanced and practical for the customer.
All products, product names, trademarks, and registrations mentioned are the property of their respective owners, all rights reserved.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2023/04/NVTPHY_AVProPartnershipPR_Image.jpg?fit=1667%2C927&ssl=19271667Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2023-04-18 10:26:312023-04-18 10:26:31NVT Phybridge Partners with AVPro, a Value-Added Technology Distributor in Portugal, to Provide its PoE Solutions to the Southern European Market
NVT Phybridge and Anixter Improve IP Surveillance Deployment for European Consumer Goods Distributor
3-minute read time
Summary
The customer, a large distributor of consumer goods, needed to update its analog surveillance system and deploy IP cameras for better video quality and monitoring capabilities.
The existing analog cameras were too far from the nearest data closet, making it challenging to provide PoE to the new IP cameras without replacing the existing wiring.
Anixter and Telefónica recommended NVT Phybridge Ethernet over Coax (EoC) solutions, which helped the customer save over €20,000 and overcome infrastructure barriers, significantly reducing deployment times and complexity during its digital transformation.
Challenge
A major European consumer goods distributor needed to upgrade to an IP surveillance system for better video quality and monitoring capabilities in one of its Spanish warehouses. The organization relied on an outdated analog surveillance system in the warehouse, which was becoming increasingly inefficient. However, the sprawling property immediately posed infrastructure barriers for the customer, as the existing analog cameras were long distances from the IDF closet. Although the customer knew it was imperative to complete the digital transformation, they could not accept the time, complexity, and cost of ripping out the existing infrastructure and replacing it with CAT5/6 Ethernet cabling.
The integrator, Telefónica, knew they needed to provide the customer with a solution that would allow them to complete the digital transformation without the cost and disruption of re-cabling, as other resellers had advised the customer to spend budget on replacing the existing infrastructure. If the customer chose to re-cable the entire facility, they would need to complete the project in various stages, making certain facility areas inaccessible during the infrastructure upgrade. The organization required a unique solution to overcome its infrastructure barriers and complete the IP surveillance upgrade.
Solution
Anixter and Telefónica recommended NVT Phybridge long-reach Power over Ethernet solutions to overcome the project’s barriers. Having successfully used these products before, both Anixter and Telefónica were confident in recommending NVT Phybridge Ethernet over Coax EoC solutions to help the customer improve its digital transformation. In just a few simple set-up steps, the NVT Phybridge EoC switches transformed the customer’s existing coax infrastructure into a robust and secure IP backbone for the new IP cameras. NVT Phybridge EoC switches deliver up to 50 watts of power (PoE++) and 10/100 Mbps symmetrical, full duplex, over coax cabling with up to 6,000ft (1,830m) reach, which is 18 times farther than standard solutions. The customer was thrilled at the technology’s ability to provide PoE to cameras furthest from the IDF closet.
Result
The customer saved over €20,000 in infrastructure costs using NVT Phybridge EoC solutions. As a result, the customer purchased all cameras required for the project simultaneously instead of in different stages, which would not have been possible if they had chosen to re-cable the facility. “Anixter feels very supported in proposing NVT Phybridge solutions, because they offer excellent pre-sales and post-sales support,” said Susana Vila, Anixter, Account Manager.
By utilizing the long-reach capabilities of NVT Phybridge solutions, the customer eliminated the need for additional IDF closets to centralize network connectivity and overcome infrastructure barriers. The customer also enhanced security by maintaining a physically separate network for the new IP surveillance system. The customer and the project partners were extremely satisfied with the outcome.
When asked for their thoughts on the NVT Phybridge solutions, the IT Director for the customer commented, “the high power delivered by NVT Phybridge PoE switches has allowed us to provide stability to our CCTV networks, avoiding loss of service in those cases where the switch electrically feeds multiple cameras. It also allowed us to have a connectivity solution where the camera is more than 100 meters away, without the need to install a power cable for the camera, thus avoiding additional costs and simplifying installation.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2023/03/Distributor_WEB.png?fit=6802%2C3915&ssl=139156802Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2023-03-28 14:54:442023-03-28 14:55:53Consumer Goods Distributor Reduces Deployment Time and Complexity During Digital Transformation
NVT Phybridge & Ronco Partner to Simplify Product Procurement and Network Readiness Requirements for Government, Education, and Healthcare Customers
Oakville, ON (March 21, 2023) – NVT Phybridge has established a strategic partnership with Team Ronco Incorporated (Ronco), an integrated communications technology company providing communications technology, installation, and support for organizations seeking to create better-connected experiences for employees and customers. The partnership combines Ronco’s industry-leading integration services with NVT Phybridge’s enterprise-grade networking solutions to exceed customers’ digital transformation expectations while reducing network costs and complexities.
“We are very excited about our partnership with NVT Phybridge and look forward to helping our customers create better-connected spaces,” said Christopher Wasp Jr., CEO of Ronco. “Their industry-leading solutions will help many customers quickly and cost-effectively modernize their network infrastructure.”
NVT Phybridge IP products are made in North America, are TAA & NDAA compliant, and are now available on the Ronco GSA Schedule to help governments simplify and accelerate the procurement of enterprise-grade networking solutions. The United States GSA Schedule is a government-wide contract with commercial vendors from all sectors, providing access to approved products at reasonable prices. Together, NVT Phybridge and Ronco help governments and private sector firms establish robust and secure PoE networks for IP and IoT devices.
“We are excited to work with Ronco to help customers in the government, education, and healthcare spaces achieve their digital transformation goals,” said Richard Kasslack, SVP of Sales and Corporate Development at NVT Phybridge. “Ronco has been a key NVT Phybridge partner for over ten years, and we look forward to elevating our partnership through this initiative.”
About Ronco
Ronco is an integrated communications technology company providing communications technology, installation, and support for critical organizations seeking to create better-connected experiences for their employees and customers. Their expertise is in Healthcare Efficiencies, Education Solutions, AV Systems, and Business Communications. Founded in 1965, they are a third-generation family-owned and operated organization headquartered in Buffalo, NY, with multiple locations operating along the East Coast.
Ronco is committed to the practice of delivering outstanding customer service with a deep understanding of project management. Discovery is key to establishing project objectives. Their teams improve workflow through system design, empower through training, unlock capabilities with integration, and offer assurance with continued support through life-cycle management.
About NVT Phybridge
NVT Phybridge is a global leader in long-reach Power over Ethernet solutions. NVT Phybridge helps organizations simplify and accelerate digital transformation projects without costly infrastructure requirements. NVT Phybridge Power over Ethernet switches and extenders provide PoE over any new or existing network infrastructure with up to 80% cost savings. Unlike other networking solutions that require the implementation of the latest network cabling, their products enable IP and IoT solutions up to 70% faster to deliver incredible ROI without the complexity or disruption of a major network overhaul.
NVT Phybridge is a North American-based technology company with global reach dedicated to practical innovation. NVT Phybridge delivers innovative and affordable networking solutions that are technologically advanced and practical for the customer. Learn more: www.nvtphybridge.com
All products, product names, trademarks, and registrations mentioned are the property of their respective owners, all rights reserved.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Quickly Deploy IP Devices in Elevator Cabins Using Existing Traveler Cables
Quick Guide for Enabling IP Devices in Elevators
NVT Phybridge networking solutions can grow modularly from 1 to 4. Therefore, if the number exceeds four units, it must be treated as a new solution with the difference in remaining equipment. Below are four scenarios for transmitting IP signals through traveling cables in vertical transport. The solutions below provide the ability to connect IP signals from the elevator cabin to the machine room. Before starting a project, the following questions must be answered to identify and support the best solution:
What is the distance of the traveling cable?
What is the potential power consumption of the IP devices in the elevator cabin (this is to determine if power can be delivered from the switch in the machine room or if the device(s) must be locally powered)?
What types of cables are available within the traveling cable?
What is the total number of devices to be placed in each cabin?
What is the total number of elevators communicating with the machine room?
Are you connecting to a Power over Ethernet (PoE) switch in the machine room?
Once these six questions are answered, the design phase is very simple. Four applications can be used, and the cable type must be known. These four applications can be connected in Star or Bus configuration.
NV-EC1701PLS-XKIT
Kit Includes: 1 x 1701+ Base Extender, 1 x 1701+ Link Adapter, 1 x NV-PS55-60W Power Supply with IEC line cord, 1 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P)
NV-EC1701PLS-K2H
Kit Includes: 1 x 1701+ Base Extender, 2 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 1 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC “T” Adapter (NV-BNCT)
NV-EC1701PLS-K3H
Kit Includes: 1 x 1701+ Base Extender, 3 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
NV-EC1701PLS-K4H
Kit Includes: 1 x 1701+ Base Extender, 4 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Star Configuration for Several Elevators with One Device in Each Elevator
One Elevator and a Single Device
NV-EC1701PLS-XKIT
Kit Includes: 1 x 1701+ Base Extender, 1 x 1701+ Link Adapter, 1 x NV-PS55-60W Power Supply with IEC line cord, 1 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P)
Single Endpoint Coax Extender Solution
Single Endpoint UTP Extender Solution
Single 60-Watt Transmission System (Coax or UTP)
NV-EC1701PLS-XKIT (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 1 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-60W Power Supply with IEC line cord
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
Two Elevators and a Single Device
NV-EC1701PLS-K2H
Kit Includes: 1 x 1701+ Base Extender, 2 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 1 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC “T” Adapter (NV-BNCT)
Two Endpoint Coax Extender Solution
Two Endpoint UTP Extender Solution
Dual 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K2H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 2 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC “T” Adapter (NV-BNCT)
Three Elevators and a Single Device
NV-EC1701PLS-K3H
Kit Includes: 1 x 1701+ Base Extender, 3 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Two Endpoint Coax Extender Solution
Three Endpoint UTP Extender Solution
Triple 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K3H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 3 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Four Elevators and a Single Device
NV-EC1701PLS-K4H
Kit Includes: 1 x 1701+ Base Extender, 4 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Four Endpoint Coax Extender Solution
Four Endpoint UTP Extender Solution
Quad 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K4H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 4 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Bus Connection When There is More Than One Device in an Elevator
**Important: NV-BNCA adapter is required for daisy chaining applications. For daisy-chaining: If purchasing an NV-EC1701PLS-K3H kit, please purchase one additional NV-BNCA separately. If purchasing an NV-EC1701PLS-K4H kit, please purchase two additional NV-BNCA separately.**
One Elevator With 2 Devices in Each Elevator
NV-EC1701PLS-K2H
Kit Includes: 1 x 1701+ Base Extender, 2 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 1 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC “T” Adapter (NV-BNCT)
Dual 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K2H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 2 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC “T” Adapter (NV-BNCT)
One Elevator with 3 Devices in Each Elevator
NV-EC1701PLS-K3H
Kit Includes: 1 x 1701+ Base Extender, 3 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Triple 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K3H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 3 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
One Elevator with 4 Devices in Each Elevator
NV-EC1701PLS-K4H
Kit Includes: 1 x 1701+ Base Extender, 4 x 1701+ Link Adapter, 1 x NV-PS55-110W Power Supply with IEC line cord, 1 x BNC Screw Terminal Adapter (NV-BNCA), 2 x BNC to 2Pin Screw Terminal Adapter – pack of 2 (NV-BNCA-2P), 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Quad 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K4H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 4 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2023/03/NVTPHY_1701Elevator_Thumbnail_Feb2023.jpg?fit=1920%2C1080&ssl=110801920Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2023-03-13 12:35:252024-02-13 09:38:11Best Way to Enable IP Devices in an Elevator Cabin
Historic Hotel Improves Its Digital Transformation Outcomes Using NVT Phybridge Ethernet over Coax (EoC) Technology
3-minute read time
Summary
A historic property wanted to deploy Juniper-Mist wireless access points but struggled with infrastructure barriers.
The customer was not able to lay new cable throughout the building due to historic property preservation restrictions.
The organization used NVT Phybridge Ethernet over Coax (EoC) solutions to overcome infrastructure barriers, reducing project costs and deployment times.
Challenge
A property management group needed to deploy Wi-Fi access points in one of its historically preserved properties. The building relied on an outdated Wi-Fi system and wanted to improve connectivity. The organization wanted to deploy Juniper-Mist wireless access points but struggled with high costs and infrastructure barriers posed by the historic building preservation laws.
Historic preservation laws often prevent organizations from re-wiring network infrastructure, opening walls, or changing a building’s structure to protect its iconic appearance. If renovations are possible, they are bound by strict regulations, which increase project costs, project timelines, and business disruption. “Rewiring means construction, which in historic buildings is a very expensive proposition,” said the project’s Network Architect. The organization needed an innovative solution to overcome its infrastructure barriers and modernize its Wi-Fi capabilities.
Solution
After thoroughly researching products available to solve the network and infrastructure concerns, the customer discovered NVT Phybridge Ethernet over Coax (EoC) solutions and contacted NVT Phybridge directly to organize a no-obligation proof-of-concept. In just a few simple set-up steps, the NVT Phybridge EoC switches transformed the customers’ existing coax infrastructure into a robust and secure IP backbone for the new Wi-Fi access points. NVT Phybridge EoC switches deliver up to 50 watts of power (PoE++) and 10/100 Mbps symmetrical, full duplex, over coax cabling with up to 6,000ft (1,830m) reach, which is 18 times farther than standard solutions. The customer was extremely impressed with the proposed solution and decided to move forward with the project.
Result
The customer estimated that NVT Phybridge EoC innovations reduced network infrastructure costs by more than $60,000 and prevented over 2 tons of cabling e-waste, based on port count. “The NVT Phybridge switches cut [deployment] times in half by removing infrastructure complexity,” said the Network Architect. “NVT Phybridge made this project possible, regardless of cost. [The project] would not have been possible without the long reach EoC switches and the ability to pass PoE over coax.”
The historic hotel achieved its digital transformation objectives and met aggressive timelines while eliminating infrastructure concerns, high costs, and business disruption. The Juniper-Mist wireless access points provide robust and secure network connectivity to guests and employees throughout the property. “NVT Phybridge technology has expanded the types of properties we’re able to bring into our hotel portfolio as we are able to onboard them faster and for significantly less money,” said the Network Architect. “NVT Phybridge was the perfect fit for our requirements and essentially made the project possible.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Understanding the Differences Between MoCA (Multimedia Over Coax Alliance) and BroadR-Reach Technology for Ethernet over Coax Applications
What is MoCA (Multimedia over Coax Alliance)?
Multimedia Over Coax Alliance (MoCA), founded in 2004, was developed by the Multimedia over Coax Alliance as a standard for networking over coaxial cable. The technology was originally developed for residential applications to distribute IP television in homes using the existing coax cabling. Today, MoCA devices are also used as an Ethernet link using a coax cable.
What are the Limitations of MoCA Devices?
The maximum transmission distance for a MoCA device depends on the version of MoCA being used and the quality of the existing coaxial cable infrastructure. It’s worth noting that the actual transmission distance can be affected by various factors, such as the quality of the coaxial cable. The greater the distance, the lower the available bandwidth. Additionally, the presence of splitters or other devices, the type of MoCA adapter used, and the level of interference from other electronic devices will also affect the transmission quality.
The transmission speeds will also differ between the varying products available on the market. The MoCA transmission provides a shared half-duplex link between all directly connected devices. Therefore, the number and type of MoCA devices and endpoints will affect the overall available bandwidth and speed.
MoCA Technology Standards
MoCA 1.0 has a maximum distance of around 300 meters (984 feet) and supports transmission speeds of up to 135Mbps.
MoCA 2.0 has a maximum distance of around 185 meters (607 feet) and supports transmission speeds of up to 1Gbps.
MoCA 2.5, the third version of MoCA, has a maximum distance of around 500 meters (1,640 feet) and can support transmission speeds of up to 2.5Gbps.
What is BroadR-Reach?
Developed by Broadcom, BroadR-Reach technology is an Ethernet physical layer that was originally designed for Ethernet over twisted-pair wiring in automotive applications. NVT Phybridge leveraged BroadR-Reach technology to develop a product set that builds on the BroadR-Reach signal format to allow for fast Ethernet transmission over single-pair UTP, multi-pair UTP, and coax cable at extended distances.
The NVT Phybridge CLEER24-10G switch extends Ethernet over new or existing coax wiring infrastructure, providing Fast Ethernet (100Mbps) connectivity over distances of up to 915 meters (3,000 feet) and 10Mbps up to 1,820 meters (6,000 feet).
Is BroadR-Reach Better than MoCA?
The short answer is yes, especially for commercial, industrial, and enterprise applications.
Unlike MoCA, the CLEER24-10G switch (using BroadR-Reach technology) provides a dedicated 100Mbps full-duplex transmission per downlink port. Therefore, there is no bandwidth sharing or degradation. Additionally, the CLEER24-10G switch offers a longer range than MoCA devices.
Both the CLEER24-10G switch and MoCA technologies are designed to provide high-speed data transfer, but they are intended for different types of use cases and employ different transmission technologies. The CLEER24-10G managed switch is an enterprise-grade solution delivering PoE+ with layer 3 functionality, while most MoCA devices are single-channel, unmanaged devices.
While MoCA is traditionally a home networking solution that uses existing coaxial cable, the CLEER24-10G switch provides robust and secure Ethernet over Coax at extreme distances, perfect for industrial, commercial, and enterprise network applications. Unlike MoCA devices that do not scale well due to their signaling format and crosstalk issues, the CLEER24-10G switch (using BroadR-Reach technology) provides industry-leading scalability and performance, even at extended distances.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2023/02/MoCA-Image-Blog.jpg?fit=1667%2C927&ssl=19271667Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2023-02-21 10:41:182023-04-03 10:44:46Multimedia Over Coax vs. BroadR-Reach for Ethernet over Coax Applications
Multinational Chemical and Consumer Goods Manufacturer Uses PoLRE Switches to Deploy Over 1,100 New IP Phones
3-minute read time
Summary
A multinational chemical and consumer goods company wanted to standardize communication across the organization
However, unforeseen network infrastructure requirements threatened a successful deployment and halted the project
The reseller partner, Innovative Telephone & Data Solutions, recommended the NVT Phybridge PoLRE switch to overcome the project’s barriers A multinational chemical and consumer goods company with leading innovations in adhesive technologies, beauty care, and home care made a global decision to standardize its communication solutions. The organization wanted to deploy Skype for Business and Microsoft Teams
Challenge
After surveying the customer’s environment, project partners determined the site’s network infrastructure wasn’t ready to support the new IP phone system. A CAT3 wiring infrastructure supported the existing communication system, and the project planners did not budget for the high costs of wide-scale re-cabling efforts across the organization. Concerned with business disruption caused by re-cabling requirements, the customer halted the project while the partners searched for an innovative solution.
Solution
Brad Batten from Innovative Telephone & Data Solutions introduced the NVT Phybridge PoLRE switch and organized a free, no-obligation proof-of-concept to test the equipment on site. The PoLRE switch delivers Ethernet and PoE over single-pair UTP cabling with up to 1,200ft (365m) reach – four times the reach of standard Ethernet switches. After a few simple setup steps, the PoLRE switch transformed the customer’s existing CAT3 wiring infrastructure into a secure and robust PoE backbone for the new enterprise communication solution. The customer was impressed with the PoLRE switch and restarted the project.
Result
The customer used the PoLRE switch to deploy over 1,100 IP phones across the organization without disruption or downtime, giving employees the latest communication applications and capabilities. “The NVT Phybridge PoLRE switch reduced deployment complexity as [the customer] did not need to schedule its operations around disruptive cable installations,” said Brad Batten. “This alone cut labor costs significantly as less overtime and off-hour work was required.” The PoLRE switch helped the customer save an estimated $750,000 USD in network infrastructure costs. “The reach capability of the PoLRE switch solved the distance requirements without re-cabling,” said Brad Batten. “Without the PoLRE switch, we would have needed to increase the data infrastructure, deploy new IDF closets, fiber, and other electronics to support them.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
ONE-TOUCH Leverages Existing Network Infrastructure to Improve the Digital Transformation Project
*3-minute read time*
Summary
A childcare center in Brussels, Belgium, wanted to upgrade its existing analogue intercom system and deploy a new IP intercom and access control solution.
The customer wanted to avoid the high costs, disruption, and complexity of re-cabling the facility.
ONE-TOUCH used NVT Phybridge PoLRE switches to overcome infrastructure barriers and complete the digital transformation project without disruption, downtime, or security concerns.
Digital Transformation Objectives
A childcare center in Brussels, Belgium, wanted to upgrade its existing analogue intercom system with a new IP intercom and access control solution using the existing 2-wire infrastructure. The organization wanted to use internet-connected intercoms and access control devices to improve operations and increase the safety of the childcare facility.
Problem
However, with a defined budget and limited tolerance for business disruption, the childcare center wanted to avoid the high costs, complexity, and disruption of removing and replacing its existing cabling infrastructure. Project partners needed to find an innovative solution to overcome the cost and complexity caused by traditional network design philosophies.
Solution
Considering the customer’s digital transformation challenges, the reseller partner, ONE-TOUCH, recommended the NVT Phybridge PoLRE switch and helped organize a no-cost, no-obligation proof-of-concept to test the technology on-site. The PoLRE switch delivers fast Ethernet and PoE over single-pair UTP cable with up to 1,200ft (365m) reach, which is four times the reach of standard switches.
After a few simple setup steps, the PoLRE long-reach PoE switch transformed the customer’s existing 2-wire infrastructure into a robust and secure PoE backbone for the IP devices. The customer was impressed and decided to move forward with the digital transformation project.
Digital Transformation Outcomes
ONE-TOUCH used PoLRE switches to deploy the new IP intercom and access control system without tampering with the newly renovated childcare center. PoLRE’s long-reach capabilities enabled devices exactly where they were needed and helped the customer reduce network readiness costs by several thousand Euros. “The PoLRE switch significantly simplified the digital transformation project by reducing the time and cost requirements,” said Vincent Matthys, Director of European Sales & Business Development at NVT Phybridge. “Re-wiring the facility would have been a financial disaster, not to mention the business disruption, network downtime, and security concerns.”
The children’s parents now have access cards to allow only permitted access to the building. “The PoLRE switch was straightforward and fast to deploy without disruption to their operations,” said Olivier Van Tricht, Owner of ONE-TOUCH. “The PoLRE switch’s unique feature set has allowed us to expand our addressable market. We can now help our customers deploy the latest IP solutions without the need to re-cable while delivering power and data over a single cable four times farther than other solutions.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
https://i0.wp.com/www.nvtphybridge.com/wp-content/uploads/2022/11/childcare-center-web.jpg?fit=1667%2C928&ssl=19281667Sebastianhttps://www.nvtphybridge.com/wp-content/uploads/2017/03/logo-3.pngSebastian2022-11-18 13:44:042022-11-24 09:18:00Childcare Center Deploys IP Intercom and Access Control Using NVT Phybridge PoE Switches
New CCMT Switch Configuration Tool Will Help Customers Simplify Network Management
Building a secure, robust, and simple-to-manage network for organizations looking to deploy IoT endpoints has proven to be a big challenge, given traditional switches’ reach and cable-type limitations. Since the start of NVT Phybridge in 2006, we have strived to deliver simplicity to our partners and end users. Our disruptive long-reach PoE innovations have broken the barriers. In nearly two decades, we have helped thousands of organizations accelerate their digital transformation, simplify network requirements, and improve their investment returns.
We have built our brand and reputation on the delicate balance between innovation, performance, quality, simplicity, and, most importantly – not following the deep-rooted paradigms established by the networking incumbents. Today, we are excited to build upon this legacy with the official release of the CCMT Switch Configuration Tool.
The CCMT Switch Configuration Tool allows users to configure, manage, and upgrade their NVT Phybridge PoE switches from a single application to reduce complexity and network management costs. This tool will help our customers manage switches across multiple locations to improve internal efficiencies while minimizing the risk of human error.
As John Chambers, former CEO of Cisco Systems and current co-founder of Nile states, traditional industry players have continually added layers of complexity to their products, and many of these organizations have lost sight of the number one consumer desire – simplicity. At NVT Phybridge, delivering simplicity has always been the core of our business. Simplicity for us is delivering network solutions that are purpose-built for the application to increase reliability and protect against advanced cyber-attacks. And now, major players like Nile Secure are addressing the root cause of the customer’s network barriers and are re-focused on delivering excellence through simplicity.
Our long-reach PoE switches overcome the traditional cable type and reach limitations of standard switches, delivering power and data over single-pair UTP, coax, or multi-pair UTP cabling with up to 6,000ft (1,830m) reach. We help our customers find innovative solutions to the pitfalls of traditional networking practices by leveraging new or existing cabling infrastructure to quickly modernize their facilities without high costs, complexity, or disruption.
I want to thank all our employees, partners, and customers for their hard work and dedication to achieving our company mission. We look forward to further supporting the success of our end users with technologies to simplify digital transformation projects.
– John Croce, CEO, NVT Phybridge
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
NOWEDA Eliminates Network Barriers and Accelerates Deployment of Over 300 IP DECT Devices Using Disruptive PoE Innovations
NOWEDA Uses NVT Phybridge PoLRE Long Reach PoE Technology to Improve its IP Communication Deployment to Avoid over 900 Kilograms of Cabling E-Waste
3-minute read time
Summary
Challenge
NOWEDA, a leading German pharmaceutical wholesaler, needed to upgrade its communication capabilities and deploy over 300 IP DECT devices throughout 20 warehousing facilities. The existing analog communication system was outdated and unreliable, which caused significant operational disruption and high maintenance costs. The organization needed to complete the IP upgrade but was concerned with the potential business disruption caused by re-cabling requirements. NOWEDA needed to find an innovative solution to help overcome infrastructure barriers and complete the digital transformation.
Solution
After thoroughly researching all networking solutions that could enable IP DECT devices using the existing single-pair UTP cabling, the customer discovered the NVT Phybridge PoLRE long-reach PoE switch. The reseller, InterData Systems, helped the customer proceed with a free, no-obligation proof-of-concept to test the equipment on-site.
After a few simple setup steps, the PoLRE switch transformed NOWEDA’s existing J-Y(ST)Y wiring infrastructure into a secure and robust PoE backbone for the new IP DECT devices. The PoLRE switch delivers Ethernet and PoE over single-pair UTP cabling with up to reach – four times the reach of standard Ethernet switches. The customer was impressed with the PoLRE switch and decided to proceed with the digital transformation project across all 20 locations.
Result
NOWEDA used the PoLRE switch to deploy over 300 IP DECT devices across its extensive warehousing facilities. InterData Systems transformed the customer’s existing network cabling into a robust and secure PoE backbone for the new system, reducing network readiness costs, business disruption, and cabling e-waste.
InterData Systems used the PoLRE switch to complete the project with minimal network downtime while eliminating the need to install new cabling, . NOWEDA now has access to advanced communication capabilities across several sites that improves its overall efficiency and productivity. Also, the company furthered its commitment to environmental sustainability by preventing over 900 kilograms of cabling e-waste.
The NOWEDA IT team was extremely satisfied with the outcome of the project. “The NVT Phybridge PoLRE PoE switch was simple to implement, stable, and error-free since we integrated them into our overall network,” said Axel Hentschel, Head of IT Infrastructure and Operations, NOWEDA. “The PoLRE switch saved us a lot of time, money, and effort for our teams.”
Sustainability
NOWEDA is committed to reducing its ecological footprint through a wide range of environmental protection measures and initiatives. Its facilities use energy from 100% renewable sources, and the organization has planted thousands of trees to support climate protection and conservation. In line with its ongoing environmental sustainability initiatives, NOWEDA used NVT Phybridge network technologies to prevent over 900 kilograms of cabling e-waste by leveraging its existing infrastructure.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow Us on Social Media!
NVT Phybridge Partners with AVPro, a Value-Added Technology Distributor in Portugal, to Provide its PoE Solutions to the Southern European Market
Oakville, ON (April 18, 2023) – NVT Phybridge, a global leader in long-reach Power over Ethernet technology, has partnered with AVPro, a technology distributor, to support partners and customers in Portugal and Southern Europe. As a value-added distributor, AVPro provides additional services to ensure digital transformation success, including project design and specialized technical training. The partnership improves NVT Phybridge’s ability to distribute products and service customers in Southern Europe.
“As AVPro continues to deploy advanced video analytics solutions for smart cities across Portugal, we realized we needed a reliable long-range PoE portfolio to remove network readiness barriers for customers,” said Carlos Ramos, CCTV & Smart Cities Solutions Coordinator, AVPro. “NVT Phybridge provides our teams with high-quality and flexible PoE solutions to address a wide range of customer needs, providing immense value to our teams.”
“As a strategic Bosch distributor in the region, AVPro is a perfect partner for us,” said Lucas Spagnuolo, Regional Sales Manager for Southern Europe. “NVT Phybridge is a Bosch-certified interoperability partner. Our partnership with AVPro will strengthen our regional partnerships as we continue to provide simple and secure connectivity from endpoint to application, resulting in better digital transformation outcomes for AVPro customers.”
About AV Pro
AVPro emerged in 2016 as a security and audio-visual equipment distributor with a differentiated approach, focusing on the solution and not simply the sale. With a highly specialized team, AVPro focuses on the customer and their project, facilitating an open and transparent buying experience. AVPro provides partners with professional service and knowledge of the solution, which translates into greater satisfaction for the end customer.
Headquartered in Albergaria-a-Velha, Aveiro, AVPro is proud to collaborate on international projects, providing in-depth technical knowledge and expertise through experience and professionalism.
About NVT Phybridge
NVT Phybridge is a global leader in long-reach Power over Ethernet solutions. We help organizations simplify and accelerate digital transformation projects without costly infrastructure requirements. NVT Phybridge Power over Ethernet switches and extenders provide PoE over any new or existing network infrastructure with up to 80% cost savings. Unlike other networking solutions that require the implementation of the latest network cabling, our products enable IP and IoT solutions up to 70% faster to deliver incredible ROI without the complexity or disruption of a major network overhaul.
NVT Phybridge is a North American-based technology company with global reach dedicated to practical innovation. We deliver innovative and affordable networking solutions that are technologically advanced and practical for the customer.
All products, product names, trademarks, and registrations mentioned are the property of their respective owners, all rights reserved.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow Us on Social Media!
Consumer Goods Distributor Reduces Deployment Time and Complexity During Digital Transformation
NVT Phybridge and Anixter Improve IP Surveillance Deployment for European Consumer Goods Distributor
3-minute read time
Summary
Challenge
A major European consumer goods distributor needed to upgrade to an IP surveillance system for better video quality and monitoring capabilities in one of its Spanish warehouses. The organization relied on an outdated analog surveillance system in the warehouse, which was becoming increasingly inefficient. However, the sprawling property immediately posed infrastructure barriers for the customer, as the existing analog cameras were long distances from the IDF closet. Although the customer knew it was imperative to complete the digital transformation, they could not accept the time, complexity, and cost of ripping out the existing infrastructure and replacing it with CAT5/6 Ethernet cabling.
The integrator, Telefónica, knew they needed to provide the customer with a solution that would allow them to complete the digital transformation without the cost and disruption of re-cabling, as other resellers had advised the customer to spend budget on replacing the existing infrastructure. If the customer chose to re-cable the entire facility, they would need to complete the project in various stages, making certain facility areas inaccessible during the infrastructure upgrade. The organization required a unique solution to overcome its infrastructure barriers and complete the IP surveillance upgrade.
Solution
Anixter and Telefónica recommended NVT Phybridge long-reach Power over Ethernet solutions to overcome the project’s barriers. Having successfully used these products before, both Anixter and Telefónica were confident in recommending NVT Phybridge Ethernet over Coax EoC solutions to help the customer improve its digital transformation. In just a few simple set-up steps, the NVT Phybridge EoC switches transformed the customer’s existing coax infrastructure into a robust and secure IP backbone for the new IP cameras. NVT Phybridge EoC switches deliver up to 50 watts of power (PoE++) and 10/100 Mbps symmetrical, full duplex, over coax cabling with up to 6,000ft (1,830m) reach, which is 18 times farther than standard solutions. The customer was thrilled at the technology’s ability to provide PoE to cameras furthest from the IDF closet.
Result
The customer saved over €20,000 in infrastructure costs using NVT Phybridge EoC solutions. As a result, the customer purchased all cameras required for the project simultaneously instead of in different stages, which would not have been possible if they had chosen to re-cable the facility. “Anixter feels very supported in proposing NVT Phybridge solutions, because they offer excellent pre-sales and post-sales support,” said Susana Vila, Anixter, Account Manager.
By utilizing the long-reach capabilities of NVT Phybridge solutions, the customer eliminated the need for additional IDF closets to centralize network connectivity and overcome infrastructure barriers. The customer also enhanced security by maintaining a physically separate network for the new IP surveillance system. The customer and the project partners were extremely satisfied with the outcome.
When asked for their thoughts on the NVT Phybridge solutions, the IT Director for the customer commented, “the high power delivered by NVT Phybridge PoE switches has allowed us to provide stability to our CCTV networks, avoiding loss of service in those cases where the switch electrically feeds multiple cameras. It also allowed us to have a connectivity solution where the camera is more than 100 meters away, without the need to install a power cable for the camera, thus avoiding additional costs and simplifying installation.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow Us on Social Media!
NVT Phybridge & Ronco Partner to Simplify Product Procurement and Network Readiness Requirements for Government, Education, and Healthcare Customers
NVT Phybridge & Ronco Partner to Simplify Product Procurement and Network Readiness Requirements for Government, Education, and Healthcare Customers
Oakville, ON (March 21, 2023) – NVT Phybridge has established a strategic partnership with Team Ronco Incorporated (Ronco), an integrated communications technology company providing communications technology, installation, and support for organizations seeking to create better-connected experiences for employees and customers. The partnership combines Ronco’s industry-leading integration services with NVT Phybridge’s enterprise-grade networking solutions to exceed customers’ digital transformation expectations while reducing network costs and complexities.
“We are very excited about our partnership with NVT Phybridge and look forward to helping our customers create better-connected spaces,” said Christopher Wasp Jr., CEO of Ronco. “Their industry-leading solutions will help many customers quickly and cost-effectively modernize their network infrastructure.”
NVT Phybridge IP products are made in North America, are TAA & NDAA compliant, and are now available on the Ronco GSA Schedule to help governments simplify and accelerate the procurement of enterprise-grade networking solutions. The United States GSA Schedule is a government-wide contract with commercial vendors from all sectors, providing access to approved products at reasonable prices. Together, NVT Phybridge and Ronco help governments and private sector firms establish robust and secure PoE networks for IP and IoT devices.
“We are excited to work with Ronco to help customers in the government, education, and healthcare spaces achieve their digital transformation goals,” said Richard Kasslack, SVP of Sales and Corporate Development at NVT Phybridge. “Ronco has been a key NVT Phybridge partner for over ten years, and we look forward to elevating our partnership through this initiative.”
About Ronco
Ronco is an integrated communications technology company providing communications technology, installation, and support for critical organizations seeking to create better-connected experiences for their employees and customers. Their expertise is in Healthcare Efficiencies, Education Solutions, AV Systems, and Business Communications. Founded in 1965, they are a third-generation family-owned and operated organization headquartered in Buffalo, NY, with multiple locations operating along the East Coast.
Ronco is committed to the practice of delivering outstanding customer service with a deep understanding of project management. Discovery is key to establishing project objectives. Their teams improve workflow through system design, empower through training, unlock capabilities with integration, and offer assurance with continued support through life-cycle management.
About NVT Phybridge
NVT Phybridge is a global leader in long-reach Power over Ethernet solutions. NVT Phybridge helps organizations simplify and accelerate digital transformation projects without costly infrastructure requirements. NVT Phybridge Power over Ethernet switches and extenders provide PoE over any new or existing network infrastructure with up to 80% cost savings. Unlike other networking solutions that require the implementation of the latest network cabling, their products enable IP and IoT solutions up to 70% faster to deliver incredible ROI without the complexity or disruption of a major network overhaul.
NVT Phybridge is a North American-based technology company with global reach dedicated to practical innovation. NVT Phybridge delivers innovative and affordable networking solutions that are technologically advanced and practical for the customer. Learn more: www.nvtphybridge.com
All products, product names, trademarks, and registrations mentioned are the property of their respective owners, all rights reserved.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow Us On Social Media!
Best Way to Enable IP Devices in an Elevator Cabin
Quickly Deploy IP Devices in Elevator Cabins Using Existing Traveler Cables
Quick Guide for Enabling IP Devices in Elevators
NVT Phybridge networking solutions can grow modularly from 1 to 4. Therefore, if the number exceeds four units, it must be treated as a new solution with the difference in remaining equipment. Below are four scenarios for transmitting IP signals through traveling cables in vertical transport. The solutions below provide the ability to connect IP signals from the elevator cabin to the machine room. Before starting a project, the following questions must be answered to identify and support the best solution:
Once these six questions are answered, the design phase is very simple. Four applications can be used, and the cable type must be known. These four applications can be connected in Star or Bus configuration.
Star Configuration for Several Elevators with One Device in Each Elevator
One Elevator and a Single Device
Single Endpoint Coax Extender Solution
Single Endpoint UTP Extender Solution
Single 60-Watt Transmission System (Coax or UTP)
NV-EC1701PLS-XKIT (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 1 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-60W Power Supply with IEC line cord
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
Two Elevators and a Single Device
Two Endpoint Coax Extender Solution
Two Endpoint UTP Extender Solution
Dual 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K2H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 2 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC “T” Adapter (NV-BNCT)
Three Elevators and a Single Device
Two Endpoint Coax Extender Solution
Three Endpoint UTP Extender Solution
Triple 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K3H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 3 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Four Elevators and a Single Device
Four Endpoint Coax Extender Solution
Four Endpoint UTP Extender Solution
Quad 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K4H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 4 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Bus Connection When There is More Than One Device in an Elevator
Multiple Endpoint Daisy-Chain Coax Extender Solution
Multiple Endpoint Daisy-Chain UTP Extender Solution
**Important: NV-BNCA adapter is required for daisy chaining applications. For daisy-chaining: If purchasing an NV-EC1701PLS-K3H kit, please purchase one additional NV-BNCA separately. If purchasing an NV-EC1701PLS-K4H kit, please purchase two additional NV-BNCA separately.**
One Elevator With 2 Devices in Each Elevator
Dual 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K2H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 2 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 1 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC “T” Adapter (NV-BNCT)
One Elevator with 3 Devices in Each Elevator
Triple 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K3H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 3 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
One Elevator with 4 Devices in Each Elevator
Quad 110 Watt Transmission System (Coax or UTP)
NV-EC1701PLS-K4H (EoC/UTP)
• 1 x 1701+ Base Extender (NV-EC1701PLS-BSE)
• 4 x 1701+ Link Adapter (NV-EC1701PLS-LK)
• 1 x NV-PS55-110W Power Supply with IEC line cord
• 1 x BNC Screw Terminal Adapter (NV-BNCA)
• 2 x BNC to 2Pin Screw Terminal Adapter, pack of 2. (NV-BNCA-2P)
• 1 x BNC Coax Splitter 1:4 (NV-EC4BNC)
Other Resources
Video – Enable IP Devices in Elevators
1701+ Product Information
NVT Phybridge Online Technical Training
Project Registration
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow NVT Phybridge on Social Media
Historic Hotel Eliminates Infrastructure Barriers and Deploys Wi-Fi Access Points
Historic Hotel Improves Its Digital Transformation Outcomes Using NVT Phybridge Ethernet over Coax (EoC) Technology
3-minute read time
Summary
Challenge
A property management group needed to deploy Wi-Fi access points in one of its historically preserved properties. The building relied on an outdated Wi-Fi system and wanted to improve connectivity. The organization wanted to deploy Juniper-Mist wireless access points but struggled with high costs and infrastructure barriers posed by the historic building preservation laws.
Historic preservation laws often prevent organizations from re-wiring network infrastructure, opening walls, or changing a building’s structure to protect its iconic appearance. If renovations are possible, they are bound by strict regulations, which increase project costs, project timelines, and business disruption. “Rewiring means construction, which in historic buildings is a very expensive proposition,” said the project’s Network Architect. The organization needed an innovative solution to overcome its infrastructure barriers and modernize its Wi-Fi capabilities.
Solution
After thoroughly researching products available to solve the network and infrastructure concerns, the customer discovered NVT Phybridge Ethernet over Coax (EoC) solutions and contacted NVT Phybridge directly to organize a no-obligation proof-of-concept. In just a few simple set-up steps, the NVT Phybridge EoC switches transformed the customers’ existing coax infrastructure into a robust and secure IP backbone for the new Wi-Fi access points. NVT Phybridge EoC switches deliver up to 50 watts of power (PoE++) and 10/100 Mbps symmetrical, full duplex, over coax cabling with up to 6,000ft (1,830m) reach, which is 18 times farther than standard solutions. The customer was extremely impressed with the proposed solution and decided to move forward with the project.
Result
The customer estimated that NVT Phybridge EoC innovations reduced network infrastructure costs by more than $60,000 and prevented over 2 tons of cabling e-waste, based on port count. “The NVT Phybridge switches cut [deployment] times in half by removing infrastructure complexity,” said the Network Architect. “NVT Phybridge made this project possible, regardless of cost. [The project] would not have been possible without the long reach EoC switches and the ability to pass PoE over coax.”
The historic hotel achieved its digital transformation objectives and met aggressive timelines while eliminating infrastructure concerns, high costs, and business disruption. The Juniper-Mist wireless access points provide robust and secure network connectivity to guests and employees throughout the property. “NVT Phybridge technology has expanded the types of properties we’re able to bring into our hotel portfolio as we are able to onboard them faster and for significantly less money,” said the Network Architect. “NVT Phybridge was the perfect fit for our requirements and essentially made the project possible.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow Us on Social Media!
Multimedia Over Coax vs. BroadR-Reach for Ethernet over Coax Applications
Understanding the Differences Between MoCA (Multimedia Over Coax Alliance) and BroadR-Reach Technology for Ethernet over Coax Applications
What is MoCA (Multimedia over Coax Alliance)?
Multimedia Over Coax Alliance (MoCA), founded in 2004, was developed by the Multimedia over Coax Alliance as a standard for networking over coaxial cable. The technology was originally developed for residential applications to distribute IP television in homes using the existing coax cabling. Today, MoCA devices are also used as an Ethernet link using a coax cable.
What are the Limitations of MoCA Devices?
The maximum transmission distance for a MoCA device depends on the version of MoCA being used and the quality of the existing coaxial cable infrastructure. It’s worth noting that the actual transmission distance can be affected by various factors, such as the quality of the coaxial cable. The greater the distance, the lower the available bandwidth. Additionally, the presence of splitters or other devices, the type of MoCA adapter used, and the level of interference from other electronic devices will also affect the transmission quality.
The transmission speeds will also differ between the varying products available on the market. The MoCA transmission provides a shared half-duplex link between all directly connected devices. Therefore, the number and type of MoCA devices and endpoints will affect the overall available bandwidth and speed.
MoCA Technology Standards
What is BroadR-Reach?
Developed by Broadcom, BroadR-Reach technology is an Ethernet physical layer that was originally designed for Ethernet over twisted-pair wiring in automotive applications. NVT Phybridge leveraged BroadR-Reach technology to develop a product set that builds on the BroadR-Reach signal format to allow for fast Ethernet transmission over single-pair UTP, multi-pair UTP, and coax cable at extended distances.
The NVT Phybridge CLEER24-10G switch extends Ethernet over new or existing coax wiring infrastructure, providing Fast Ethernet (100Mbps) connectivity over distances of up to 915 meters (3,000 feet) and 10Mbps up to 1,820 meters (6,000 feet).
Is BroadR-Reach Better than MoCA?
The short answer is yes, especially for commercial, industrial, and enterprise applications.
Unlike MoCA, the CLEER24-10G switch (using BroadR-Reach technology) provides a dedicated 100Mbps full-duplex transmission per downlink port. Therefore, there is no bandwidth sharing or degradation. Additionally, the CLEER24-10G switch offers a longer range than MoCA devices.
Both the CLEER24-10G switch and MoCA technologies are designed to provide high-speed data transfer, but they are intended for different types of use cases and employ different transmission technologies. The CLEER24-10G managed switch is an enterprise-grade solution delivering PoE+ with layer 3 functionality, while most MoCA devices are single-channel, unmanaged devices.
While MoCA is traditionally a home networking solution that uses existing coaxial cable, the CLEER24-10G switch provides robust and secure Ethernet over Coax at extreme distances, perfect for industrial, commercial, and enterprise network applications. Unlike MoCA devices that do not scale well due to their signaling format and crosstalk issues, the CLEER24-10G switch (using BroadR-Reach technology) provides industry-leading scalability and performance, even at extended distances.
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow NVT Phybridge on Social Media
Multinational Manufacturer Reduces Digital Transformation Costs By $750,000 USD
Multinational Chemical and Consumer Goods Manufacturer Uses PoLRE Switches to Deploy Over 1,100 New IP Phones
3-minute read time
Summary
Challenge
After surveying the customer’s environment, project partners determined the site’s network infrastructure wasn’t ready to support the new IP phone system. A CAT3 wiring infrastructure supported the existing communication system, and the project planners did not budget for the high costs of wide-scale re-cabling efforts across the organization. Concerned with business disruption caused by re-cabling requirements, the customer halted the project while the partners searched for an innovative solution.
Solution
Brad Batten from Innovative Telephone & Data Solutions introduced the NVT Phybridge PoLRE switch and organized a free, no-obligation proof-of-concept to test the equipment on site. The PoLRE switch delivers Ethernet and PoE over single-pair UTP cabling with up to 1,200ft (365m) reach – four times the reach of standard Ethernet switches. After a few simple setup steps, the PoLRE switch transformed the customer’s existing CAT3 wiring infrastructure into a secure and robust PoE backbone for the new enterprise communication solution. The customer was impressed with the PoLRE switch and restarted the project.
Result
The customer used the PoLRE switch to deploy over 1,100 IP phones across the organization without disruption or downtime, giving employees the latest communication applications and capabilities. “The NVT Phybridge PoLRE switch reduced deployment complexity as [the customer] did not need to schedule its operations around disruptive cable installations,” said Brad Batten. “This alone cut labor costs significantly as less overtime and off-hour work was required.” The PoLRE switch helped the customer save an estimated $750,000 USD in network infrastructure costs. “The reach capability of the PoLRE switch solved the distance requirements without re-cabling,” said Brad Batten. “Without the PoLRE switch, we would have needed to increase the data infrastructure, deploy new IDF closets, fiber, and other electronics to support them.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow NVT Phybridge on Social Media
Childcare Center Deploys IP Intercom and Access Control Using NVT Phybridge PoE Switches
ONE-TOUCH Leverages Existing Network Infrastructure to Improve the Digital Transformation Project
*3-minute read time*
Summary
Digital Transformation Objectives
A childcare center in Brussels, Belgium, wanted to upgrade its existing analogue intercom system with a new IP intercom and access control solution using the existing 2-wire infrastructure. The organization wanted to use internet-connected intercoms and access control devices to improve operations and increase the safety of the childcare facility.
Problem
However, with a defined budget and limited tolerance for business disruption, the childcare center wanted to avoid the high costs, complexity, and disruption of removing and replacing its existing cabling infrastructure. Project partners needed to find an innovative solution to overcome the cost and complexity caused by traditional network design philosophies.
Solution
Considering the customer’s digital transformation challenges, the reseller partner, ONE-TOUCH, recommended the NVT Phybridge PoLRE switch and helped organize a no-cost, no-obligation proof-of-concept to test the technology on-site. The PoLRE switch delivers fast Ethernet and PoE over single-pair UTP cable with up to 1,200ft (365m) reach, which is four times the reach of standard switches.
After a few simple setup steps, the PoLRE long-reach PoE switch transformed the customer’s existing 2-wire infrastructure into a robust and secure PoE backbone for the IP devices. The customer was impressed and decided to move forward with the digital transformation project.
Digital Transformation Outcomes
ONE-TOUCH used PoLRE switches to deploy the new IP intercom and access control system without tampering with the newly renovated childcare center. PoLRE’s long-reach capabilities enabled devices exactly where they were needed and helped the customer reduce network readiness costs by several thousand Euros. “The PoLRE switch significantly simplified the digital transformation project by reducing the time and cost requirements,” said Vincent Matthys, Director of European Sales & Business Development at NVT Phybridge. “Re-wiring the facility would have been a financial disaster, not to mention the business disruption, network downtime, and security concerns.”
The children’s parents now have access cards to allow only permitted access to the building. “The PoLRE switch was straightforward and fast to deploy without disruption to their operations,” said Olivier Van Tricht, Owner of ONE-TOUCH. “The PoLRE switch’s unique feature set has allowed us to expand our addressable market. We can now help our customers deploy the latest IP solutions without the need to re-cable while delivering power and data over a single cable four times farther than other solutions.”
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow NVT Phybridge on Social Media
Introducing the NVT Phybridge CCMT Switch Configuration Tool
New CCMT Switch Configuration Tool Will Help Customers Simplify Network Management
Building a secure, robust, and simple-to-manage network for organizations looking to deploy IoT endpoints has proven to be a big challenge, given traditional switches’ reach and cable-type limitations. Since the start of NVT Phybridge in 2006, we have strived to deliver simplicity to our partners and end users. Our disruptive long-reach PoE innovations have broken the barriers. In nearly two decades, we have helped thousands of organizations accelerate their digital transformation, simplify network requirements, and improve their investment returns.
We have built our brand and reputation on the delicate balance between innovation, performance, quality, simplicity, and, most importantly – not following the deep-rooted paradigms established by the networking incumbents. Today, we are excited to build upon this legacy with the official release of the CCMT Switch Configuration Tool.
The CCMT Switch Configuration Tool allows users to configure, manage, and upgrade their NVT Phybridge PoE switches from a single application to reduce complexity and network management costs. This tool will help our customers manage switches across multiple locations to improve internal efficiencies while minimizing the risk of human error.
Download the CCMT Tool now for free >>
As John Chambers, former CEO of Cisco Systems and current co-founder of Nile states, traditional industry players have continually added layers of complexity to their products, and many of these organizations have lost sight of the number one consumer desire – simplicity. At NVT Phybridge, delivering simplicity has always been the core of our business. Simplicity for us is delivering network solutions that are purpose-built for the application to increase reliability and protect against advanced cyber-attacks. And now, major players like Nile Secure are addressing the root cause of the customer’s network barriers and are re-focused on delivering excellence through simplicity.
Our long-reach PoE switches overcome the traditional cable type and reach limitations of standard switches, delivering power and data over single-pair UTP, coax, or multi-pair UTP cabling with up to 6,000ft (1,830m) reach. We help our customers find innovative solutions to the pitfalls of traditional networking practices by leveraging new or existing cabling infrastructure to quickly modernize their facilities without high costs, complexity, or disruption.
I want to thank all our employees, partners, and customers for their hard work and dedication to achieving our company mission. We look forward to further supporting the success of our end users with technologies to simplify digital transformation projects.
– John Croce, CEO, NVT Phybridge
If you have an upcoming IP/IoT modernization project, we would love to help! Click below to book a one-on-one meeting with one of our Digital Transformation Consultants.
Follow NVT Phybridge on Social Media