IP Products

NVT Phybridge CHARIoT Products

NVT Phybridge Power over Ethernet switches leverage new or existing coax, single-pair UTP (Unshielded Twisted Pair), and multi-pair UTP cabling to create secure and robust PoE connections for devices up to 6,000ft (1,830m) away from the application.

FLEX Family – Ethernet & PoE Over Multi-Pair UTP

The FLEX Family of Switches and Extenders makes the modernization to IP devices simple, secure and cost-effective by leveraging Multi-Pair UTP infrastructure (existing or new) to extend PoE connectivity up to 2,000ft (610m) – that’s 6Xs the reach of standard Ethernet switches. To learn more about the FLEX Family click here.

NVT Phybridge FLEX24-10G PoE Switch

FLEX24: 10 Gigabit PoE Switch

(NV-FLX-024-10G)

The FLEX24-10G switch delivers up to 50 Watts of power (PoE++) and 10/100/1000 Mbps symmetrical, full-duplex, over 2 or 4 pair UTP (unshielded twisted pairs) cabling with up to 2,000ft (610m) reach.

FLEX24: 24-Port Managed Switch

(NV-FLX-024)

When paired with the FLEX Adapters, the FLEX24 switch delivers fast Ethernet and PoE over Multi-Pair UTP with up to 2,000ft (610m) reach
This product has been discontinued. Please refer to the FLEX24-10G as an alternative solution.

FLEX8: 8-Port Unmanaged Switch

(NV-FLX-08)

When paired with the FLEX Adapters, the plug and play FLEX8 switch delivers fast Ethernet and PoE over Multi-Pair UTP with up to 2,000ft (610m) reach

FLEX-Base Extender

(NV-FLXLK-BSE)

The FLEX-Base Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch delivering 10/100Mbps symmetrical (full duplex) and PoE over Multi-Pair UTP with distances up to 2,000ft (610m).

CLEER FAMILY – Ethernet & PoE Over Coax

The CLEER Family of Switches and Extenders makes the modernization to IP devices simple, secure and cost-effective by leveraging Coax infrastructure (existing or new) to extend PoE connectivity up to 6,000ft (1,830m) – that’s 18Xs the reach of standard Ethernet switches. To learn more about the CLEER Family click here.

NVT Phybridge CLEER24-10G Switch

CLEER24-10G: 24-Port Layer 3 Managed Switch

(NV-CLR-024-10G)

The NVT Phybridge CLEER24-10G Layer 3 Enterprise Grade switch is designed to make IP/IoT deployments simple, secure, and cost-effective. The CLEER24-10G switch delivers up to 50 Watts of power (PoE++) and 10/100 Mbps symmetrical, full-duplex, over coax cabling with up to 6,000ft (1,830m) reach.*

CLEER24: 24-Port Managed Switch

(NV-CLR-024)

When paired with the EC Adapters, the CLEER24 switch delivers fast Ethernet and PoE over Coax with up to 6,000ft (1,830m).
This product has been discontinued. Please refer to the CLEER24-10G as an alternative solution.

EC10: 10-Port Unmanaged Switch

(NV-EC-10)

When paired with the EC Adapters, The plug and play EC10 switch delivers fast Ethernet and PoE over Coax with up to 3,000ft (915m) reach.

EC-Base Extender

(NV-ECLK-BSE)

The EC-Base Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax with distances up to 6,000ft (1,830m).

PoLRE FAMILY – Ethernet & PoE Over Single-Pair UTP

The PoLRE Family of Switches and Extenders makes the modernization to IP devices simple, secure and cost-effective by leveraging Single-Pair UTP infrastructure (existing or new) to extend PoE connectivity up to 1,200ft (365m) – that’s 4Xs the reach of standard Ethernet switches. To learn more about the PoLRE Family click here.

PoLRE24/48: 24- or 48-Port Managed Switch

(NV-PL-024) | (NV-PL-048)

When paired with the PhyLink Adapter, the PoLRE24/48 switch delivers fast Ethernet and PoE over Single-Pair UTP with up to 1,200ft (365m) reach

PoLRE LPC: 8-Port Unmanaged Switch

(NV-PL-08)

When paired with the PhyLink Adapters, the plug and play PoLRE LPC switch delivers fast Ethernet and PoE over Single-Pair UTP with up to 1,200ft (365m) reach

1701 & 1801 TBus Series

Media converters and extenders that can leverage multiple cable types to extend Ethernet and power to greater distance

1701+ Base Ethernet Extender

1701+ Base Extender

(NV-EC1701PLS-BSE)

The NVT Phybridge 1701+ Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch, delivering up to 420Mbps and PoE+ over Coax, single pair UTP or 2 wire infrastructures with reach of up to 8,000ft (2.4km) on RG6.

NV-EC1701 – Ethernet over Coax

Ethernet over Coax EoC Transceiver with PoE Power

NV-EC1701 is a compact media converter that allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using coax cable. These devices are often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras.
This product has been discontinued. Please refer to the 1701+ as an alternative.

NV-EC1701

NV-EC1701U – Ethernet over 2-wire

Ethernet over 2-wire Transceiver with PoE Power

NV-EC1701U Eo2™ is a compact media converter that allows 10/100 BaseT Ethernet and PoE or PoE+ power to be transmitted using 18/2 or similar. These devices are typically used in legacy installations where existing 18/2 is re-used as part of an upgrade to IP devices.
This product has been discontinued. Please refer to the 1701+ as an alternative.

NV-EC1701U

NV-ET1801 – Single Port PoE+ Transmitter

TBus® Single Port PoE+ Transmitter

NV-ET1801 is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded Twisted Pair cable.
This product has been discontinued. Please refer to the 1701+ as an alternative.

NV-ET1801

NV-ET1804 – Four Port PoE+ Transmitter

TBus® Four Port PoE+ Transmitter

NV-ET1804 is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded Twisted Pair cable.
This product has been discontinued. Please refer to the 1701+ as an alternative.

NV-ET1804

NV-ER1804 – TBus® Four Port Receiver

TBus Ethernet over Coax/UTP Receiver

NV-ER1804 is a compact bus-architected receiver hub that has four TBus ports, each capable of supporting multiple TBus transmitters and their subsequent 10/100BaseT Ethernet and PoE+ powered devices.
This product has been discontinued. Please refer to the 1701+ as an alternative.

NV-ER1804

ANALOG PRODUCTS

Clearance discounts on all analog products available through ADI, Anixter, and B&H Photo!

POWER, VIDEO + DATA

NVT Phybridge has a full range of CCTV hybrid video transmission products featuring RJ45 connectivity. These RJ45 products were specifically designed for installers experienced with structured cabling systems and want to take advantage of being able to power cameras at extended distance, deliver high quality video and telemetry through the use of our PVD models. All NVT PVD RJ45 products are compatible with 568B premise wiring standards and pinouts and allowing easy future modernization to an all-digital solution.

32-Channel Power Supply Stubeq Active Receiver Hub

32-Channel Power Supply StubEQ™ Active Receiver Hub

The 32-channel NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-32PS42-PVD

16 Port Power Supply Stubeq Active Receiver Hub

16-Channel Power Supply StubEQ™ Active Receiver Hub

The 16-channel NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-16PS42-PVD

8-Channel Power Supply Stubeq Active Receiver Hub

8-Channel Power Supply StubEQ™ Active Receiver Hub

The 8-channel NV-8PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-8PS42-PVD

This product is end of life. Please visit our EOL Products page for more information

16 Channel Power Supply Passive Video Receiver Hub

16 Channel Power Supply Passive Video Receiver Hub

The 16-channel NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-16PS13-PVD

8CH Power Supply Passive Video Receiver Hub

8 Channel Power Supply Passive Video Receiver Hub

The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-8PS13-PVD

This product is end of life. Please visit our EOL Products page for more information

4 Channel Power Supply Passive Video Receiver Hub

4 Channel Power Supply Passive Receiver Hub

The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring.

NV-4PS13-PVD

16 Channel Power Supply Cable Integrator Receiver Hub

16 Channel Power Supply Cable Integrator Hub

NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room.

NV-16PS10-PVD

4-Channel Power Supply Cable Integrator Hub

4 Channel Power Supply Cable Integrator Hub

NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all over UTP wire.

NV-4PS10-PVD

16-Channel Power Supply Cable Integrator Hub

16 Channel Cable Integrator Hub

Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a “pass-through” wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

NV-716J-PVD

NVT Phybridge 4 Channel Power Supply Cable Passive Integrator Hub

4 Channel Cable Passive Integrator

Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive “pass-through” wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

NV-704J-PVD

NV-226J-PV Video Transmitter +12VDC Converter

UTP Video Passive Transmitter +12VDC Converter

The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

NV-226J-PV

NV 218A PVD

Power-Video-Data Passive Transceiver

NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

NV-218A-PVD

NV-216A-PV Video Passive Transceiver

Power-Video Passive Transceiver

NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

NV-216A-PV

CCTV

NVT Phybridge has a full range of CCTV video transmission products featuring Screw Terminal and screwless termination. These products were specifically designed for CCTV market installers who desire to install UTP structured cabling systems and stop using coax.

NV-3272

32-Channel DigitalEQ™ Active Receiver Hub

Employing NVT‘s DigitalEQ™ technology, the NV-3272 is an 32-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire.

NV-3272

This product is end of life. Please visit our EOL Products page for more information

32-Channel StubEQ™ Active Receiver Hub

Employing NVT’s StubEQ™ technology, the NV-3242 is a 32-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000ft (600m) using Category 2 or better unshielded twisted-pair (UTP) wire.

NV-3242

32-Channel Video Passive Transceiver Stub Hub

32-Channel Video Passive Transceiver Stub Hub

NV-3213S is a compact 32-channel passive transceiver stub hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-3213S

32-Channel Video Passive Transceiver Stub Hub

32-Channel Video Passive Transceiver Hub

NV-3213 is a 32 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-3213

16-Channel Digitaleq Active Receiver Distribution HUB

16-Channel DigitalEQ™ Active Receiver DA Hub

Employing NVT‘s DigitalEQ™ technology, the NV-1672 is an 16-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire.

NV-1672

16-Channel StubEQ Active Receiver Distribution HUB

16-Channel StubEQ™ Active Receiver Hub

Employing NVT’s StubEQ™ technology, the NV-1642 is a 16-channel active (amplified) hub that allows the transmission of real time monochrome or color video for distances up to 2,000ft (600m2,) using Category 5 or better unshielded twisted-pair (UTP) wire.

NV-1642

16-Channel CCTV Video Passive Transceiver Stub Hub

16-Channel Video Passive Transceiver Stub Hub

NV-1613S is a compact 16-channel passive transceiver stub hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable.

NV-1613S

16-Channel CCTV Video Passive Transceiver Hub

16-Channel Video Passive Transceiver Hub

NV-1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

NV-1613

8-Channel Digital EQ Active Receiver DA Hub

8-Channel Digital EQ™ Active Receiver DA Hub

Employing NVT Phybridge’s Digital EQ™ technology, the NV-872 is an 8-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire.

NV-872

NV-842 8-Channel Active Transceiver StubEQ Receiver Hub

8 Channel StubEQ™ Active Receiver Hub

Employing NVT’s StubEQ™ technology, the NV-842 is an 8-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000ft (600m) using Category 2 or better unshielded twisted-pair (UTP) wire.

NV-842

NV-813S 8-Channel Passive Transceiver Stub Hub

8-Channel Video Passive Transceiver Stub Hub

NV-813S is a compact 8-channel passive transceiver stub hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-813S

NV-813

8-Channel Video Passive Transceiver Hub

NV-813 is an 8 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-813

NV-452R 4-channel Video Active Receiver

4-Channel Video Active Receiver

NV-452R 4-channel Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using Category Unshielded Twisted-Pair (UTP) telephone wire.

NV-452R

4-Channel Stubeq Active Receiver Hub

4 Channel StubEQ™ Active Receiver Hub

Employing NVT’s StubEQ™ technology, the NV-442 is a 4-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000ft (600m) using Category wire.

NV-442

NV-413A-NV-413A 4-channel Video Passive Transceiver

4-Channel Video Passive Transceiver

NV-413A 4-channel Video Transceivers is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-413A

NV 653T-NV-653T 8-Channel Video Active Transmitter

Single Channel Video Active Transmitter

NV-653T Video Transmitter is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or better Unshielded Twisted-Pair (UTP) telephone wire.

NV-653T

This product is end of life. Please visit our EOL Products page for more information

NV 652R-NV-652R Single Channel Video Active Receiver

Single Channel Video Active Receiver

NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using Category 2 or better Unshielded Twisted-Pair (UTP) telephone wire.

NV-652R

This product is end of life. Please visit our EOL Products page for more information

NV-217J-M Single Channel Passive Video Transceiver Hub

Single Channel Passive Video Transceiver

NV-217J-M Single Channel Passive Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.

NV-217J-M

NV-208A-M

Single Channel Video Passive Transceiver

NV-208A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-208A-M

This product is end of life. Please visit our EOL Products page for more information

Single Channel Video Passive Transceiver with Coax Pigtail

Single Channel Video Passive Transceiver with Coax Pigtail

NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

NV-214A-M

NV-215J-M

Single Channel Video Passive Transceiver RJ45

NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-215J-M

Audio and Video

NVT Phybidge has a full range of Video/Audio transmission products that allow the transmission of real-time color video and audio over Unshielded Twisted Pair (UTP) cable on a structured cabling system. Baseband (composite) signals of any type are supported. Perfect for distance learning and prison visitation systems were realtime video and audio are specified.

NV-314A

Passive Video/Audio Transceiver

The NVT Model NV-314A Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-314A

This product is end of life. Please visit our EOL Products page for more information

Dual Video/Audio Transceiver

Dual Passive Video/Audio Transceiver

NV-418A Dual Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-418A

Dual Video/Audio Transceiver

Rack Mount Dual Passive Video/Audio Transceiver

NV-418AR Dual Video/Audio Transceiver is a rack-mount passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-418AR

NV-518A

Dual Video/Audio Transceiver

NV-518A Dual Video/Audio Transceiver contains one amplified receiver that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. An additional passive port is included allowing the support of bi-directional video, or as a second receive path up to 750ft (225m).

NV-518A