NV-813S is a compact 8-channel passive transceiver stub hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.
Compact rack mountable 19″ 1U high enclosure features 8 channels and only 1.54″ (40mm) deep
Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
Use with any NVT DigitalEQ™ or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
Use with any NVT StubEQ™ for distances up to 1,500ft (460m)
RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors included
No power required
Exceptional interference rejection
Frequency Response DC to 10 MHz
Built-in transient protection
Supports “up-the coax” type control signal up to 750ft (225m)
Compatible with qualified UTP cameras
Coax jumper cables are not included (see Accessories below)
The NV-RJ45A RJ45 to Screw Terminal adaptor is wired in accordance with the EIA/TIA 568B wiring standard for structured cabling. This is the same standard that NVT uses in all our products. Please refer to the wiring/pinout diagrams for details as to how UTP conductors are landed on the screw terminal side and marked according to each input channel.